|
|
4 x ERFURT 2 point
single action mechanical presses
Model PKZZ
IV. 500. I. TS
Produced in 1984 , erected in 1986/7
Never in Production
AS NEW
Table 2800 x 1500
Still under power in the works.
|
|
|
|
Erfurt PKZZ I 1250
2 Point SingleAction Mechanical Press
1980/81
Bed Area - 4000 x 1800
Still under power
|
|
|
|
UNUSED
ERFURT PRESS LINE
Installed in 1992
Never
used from installation trials - Available
NOW !!!!
1.PD2-HH400+250ES double action 650 ton
Erfurt press - 1 - Press
2.PE2-HH500 1 TS single action 500 ton
Erfurt press - 5 - Presses
Model and type PE2-HH500 1 TS
Max ram force kN 5000
Slide stroke 500 mm
Slide adjustment 400 mm
Max shut height 1120 mm
Bed area 2800x1500
Slide area 2800x1500
Opening at the bed 2520x1020
Main drive power 134 kWt
Number of no-load stroke 12,5 - 32
Cushion force in the bolster 1000 kN
Cushion stroke 200 mm
Height over the floor, some 8200mm
Model and type PD2-HH400+250ES
Max force of drawing slide kN 4000
Max force of blankholder kN 2500
Max drawing depth mm 250
Drawing slide stroke, some 800 mm
Stroke on the blackholder, some 630mm
Adjustability of two slides, each 400mm
Max shut height
drawing slide 1600mm
blankholder 1500mm
Bed area 2800x1800
Drawing Slide area 2240x1200
Blankholder area 2800x1800
Opening at the bolster 2070x1170
Main drive power 134 kWt
Number of no-load stroke 11 - 22
Height over the floor, some 9000mm
|
|
|
|
DUALFORM
- VII
- new in 1982
- working slider capacity 127 ton
- clamping slider capacity 127 ton
- working hydraulic ram stroke 762 mm
- clamping hydraulic ram stroke 533 mm
- stamping speed range 1220 mm/min
- max. workpiece dimensions 1118 x 965 mm
- dimensions 2750 x 2590 mm
- height 4268 mm - weight 25 tons
|
|
|
|
Erfurt Model PKZZ I
800 New 1986
Still under power
2 Point Press - Fixed table
Bed Area - 3150 x 1600
|
|
SMS
SHLOEMANN SIEMAG 2 500 t, new 1980
very good condition:
Oil-hydraulic one-stage four-arms press for open
forging
with under floor drive:
Nominal power (static) - 2 500 t.
Nominal power (static)
with the working pressure 400 bars - 3 150 t.
Return power (static)
with the working pressure 320 bars - 4 x 156,5 mP.
/Return and compensation/
Dimensions:
Upper traverse movement - 2 000 mm.
Light height between the surfaces
(for instruments fixing) - 4 250 mm.
Light width of the press bed between sleeves:
In the direction of the table movement - 3 000 mm.
In the direction of block-head
("SATTEL" in German) movement - 1 650
mm.
Press height over floor level - 7 500 mm.
|
|
DUALFORM
Press Model 8/9
750/500 Ton and of the system for producing
casting
dies - NEW 1987 [Practically UNUSED]
Technical data of hydraulic Press:
Slide effort, t:
Inner slide - 750,
External slide - 500.
Slides stroke - 1300 mm.
Max. distance between the plate and the slides -
2250 mm.
Table dimensions - 3500 x 2740 mm.
Slides dimensions:
Inner - 2150 x 1650 mm,
External - 3500 x 2630 mm.
Press weight - 146 t.
Technical data of the system for producing
casting dies:
Effort of parting (plane), mPa:
Nominal - 0,33.
Maximal - 0,80.
Slide stroke - 1400 mm.
Max. distance between the table and the slide -
2200 mm.
Consumption of cooling water - 45 l/min.
Weight - 36 t.
Technical data of the bath (tank) for casting of
dies:
Temperature of alloy heating - 140...145 C.
Time of alloy heating - 6-8 hours.
Time of alloy cooling - 4-5 hours.
Max. dimensions of:
Instrument - 2100x1600x400 mm.
Sheet billet - 2900x2500 mm.
Weight of:
alloy - 14000 kgs, bath - 38000 kgs. |
|
Per ulteriori informazioni e
richieste specifiche, contattateci direttamente.
|
Pagina precedente
